Tuesday, 22 June 2010

Hood Fitting

I started to fit the hood today as I want a bit of weather proofing before I go to Le Mans

First job is to lay the roof over the frame and centralise it

DSC00074

Two things you will need are plenty of ,masking tape, and duck/carpet tape.

Once it was centralised I fixed it at the front with carpet tape and stretched and glued it to the GRP moulding at the back. Then glued the front.

DSC00078

DSC00076

That’s it. You might of guessed by now that I forgot to take pictures again. but it’s all pretty straight forward, just lots stretching pulling and sticking. SimonR has a good write up about it (with plenty of pictures)

Side screens next.

No comments:

Post a Comment